Free frog SVG

Pair of frog feet SVG

Pair of frog feet, as a solid black shape
Pair of frog feet. The preview is the SVG file itself.

Two webbed hind feet with five long toes each, as two loose pieces. Use them as footprints hopping across a wall, a card or a classroom floor.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 57 mm (3.94 × 2.23 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length534 mm at this size
Narrowest part4.3 mm at this size
Nodes146 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,165 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)1.1 mm136 mm150Vinyl, card and thin sheet
2 × 1.13 in (51 × 29 mm)2.2 mm271 mm45Vinyl, card and thin sheet
3 × 1.7 in (76 × 43 mm)3.3 mm407 mm18Any material, including 3 mm wood and acrylic
4 × 2.26 in (102 × 58 mm)4.4 mm543 mm8Any material, including 3 mm wood and acrylic
6 × 3.4 in (152 × 86 mm)6.6 mm814 mm3Any material, including 3 mm wood and acrylic
8 × 4.53 in (203 × 115 mm)8.7 mm1,085 mm2Any material, including 3 mm wood and acrylic
12 × 6.79 in (305 × 173 mm)13 mm1,628 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More frog SVG files

← Frog face All 15 frogs Frog monogram frame →