Free frog SVG

Frog outline SVG

Frog outline, drawn as a line — Frog outline. The preview is the SVG file itself.

The tree frog from above drawn as one even line, with a ring for each eye. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 91 mm (3.94 × 3.6 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	1,448 mm at this size
Narrowest part	1.8 mm at this size
Nodes	475 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,835 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.91 in (25 × 23 mm)	0.46 mm	368 mm	100	Too fine for most machines
2 × 1.83 in (51 × 46 mm)	0.91 mm	736 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.74 in (76 × 70 mm)	1.4 mm	1,103 mm	12	Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)	1.8 mm	1,471 mm	6	Vinyl, card and thin sheet
6 × 5.48 in (152 × 139 mm)	2.7 mm	2,207 mm	2	Vinyl, card and thin sheet
8 × 7.31 in (203 × 186 mm)	3.7 mm	2,942 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.97 in (305 × 279 mm)	5.5 mm	4,414 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More frog SVG files

← Frog monogram frame All 15 frogs Tree frog from above →