Frog prince with a crown SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The frog from the fairy tale, facing you on a lily pad and wearing a three-pointed crown. For story sacks, book corners and party invitations.
What is in the file
| Size | 100 × 90 mm (3.94 × 3.54 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 795 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 262 curve and line segments |
Measured from the file. PNG: 2,000 × 1,806 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.9 in (25 × 23 mm) | 0.51 mm | 202 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.8 in (51 × 46 mm) | 1 mm | 404 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.7 in (76 × 69 mm) | 1.5 mm | 606 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.6 in (102 × 91 mm) | 2 mm | 808 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.39 in (152 × 137 mm) | 3 mm | 1,212 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.19 in (203 × 183 mm) | 4.1 mm | 1,615 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.79 in (305 × 274 mm) | 6.1 mm | 2,423 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.