Poison dart frog SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A slim poison dart frog walking, seen from above, with the bold blotches of its warning colours cut out of its back and legs. Back it with bright blue, yellow or red.
What is in the file
| Size | 100 × 99 mm (3.94 × 3.9 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 746 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 247 curve and line segments |
Measured from the file. PNG: 2,000 × 1,981 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.99 in (25 × 25 mm) | 0.46 mm | 189 mm | 100 | Too fine for most machines |
| 2 × 1.98 in (51 × 50 mm) | 0.91 mm | 379 mm | 25 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.97 in (76 × 75 mm) | 1.4 mm | 568 mm | 9 | Vinyl, card and thin sheet |
| 4 × 3.96 in (102 × 101 mm) | 1.8 mm | 758 mm | 4 | Vinyl, card and thin sheet |
| 6 × 5.94 in (152 × 151 mm) | 2.7 mm | 1,137 mm | 1 | Vinyl, card and thin sheet |
| 8 × 7.92 in (203 × 201 mm) | 3.7 mm | 1,516 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.88 in (305 × 302 mm) | 5.5 mm | 2,274 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.