Free devil SVG

Devils tail with a spade tip SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Devils tail with a spade tip, as a solid black shape — Devils tail with a spade tip. The preview is the SVG file itself.

A long tail that loops round on itself and ends in a broad spade, thinning from root to tip. Tuck the root behind a letter, a heart or the edge of a card.

What is in the file

Size	61 × 100 mm (2.39 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	393 mm at this size
Narrowest part	4.9 mm at this size
Nodes	73 curve and line segments

Measured from the file. PNG: 1,244 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.61 × 1 in (15 × 25 mm)	1.2 mm	100 mm	150	Vinyl, card and thin sheet
1.21 × 2 in (31 × 51 mm)	2.5 mm	200 mm	40	Vinyl, card and thin sheet
1.82 × 3 in (46 × 76 mm)	3.7 mm	299 mm	18	Any material, including 3 mm wood and acrylic
2.43 × 4 in (62 × 102 mm)	5 mm	399 mm	8	Any material, including 3 mm wood and acrylic
3.64 × 6 in (93 × 152 mm)	7.5 mm	599 mm	3	Any material, including 3 mm wood and acrylic
4.86 × 8 in (123 × 203 mm)	10 mm	799 mm	2	Any material, including 3 mm wood and acrylic
7.28 × 12 in (185 × 305 mm)	15 mm	1,198 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More devil SVG files

← Devil horns on a headband All 16 devils Devil horns and tail set →