Devil horns and tail monogram ring SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A plain ring with horns on top and a spade-tipped tail curling away from the lower right, with the middle left open for an initial. Weld the letter to the ring to make one piece.
What is in the file
| Size | 100 × 93 mm (3.94 × 3.65 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 731 mm at this size |
| Narrowest part | 2.7 mm at this size |
| Nodes | 104 curve and line segments |
Measured from the file. PNG: 2,000 × 1,858 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.93 in (25 × 24 mm) | 0.69 mm | 186 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.85 in (51 × 47 mm) | 1.4 mm | 371 mm | 25 | Vinyl, card and thin sheet |
| 3 × 2.78 in (76 × 71 mm) | 2.1 mm | 557 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.7 in (102 × 94 mm) | 2.7 mm | 743 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.56 in (152 × 141 mm) | 4.1 mm | 1,114 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.41 in (203 × 188 mm) | 5.5 mm | 1,485 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.11 in (305 × 282 mm) | 8.2 mm | 2,228 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Layered red devil face in four colours Layered · 14 pieces -
Devil face with horns and a grin Solid · one piece -
Simple devil face Solid · one piece -
Demon devil with long horns Solid · one piece -
She devil with lashes and lips Solid · one piece -
Devil horns, pair Solid · 2 pieces -
Devil horns on a headband Solid · one piece -
Devils tail with a spade tip Solid · one piece
← Devil mask with eye holes All 16 devils Layered red devil face in four colours →