Layered red devil face in four colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The grinning face as four layers to stack: a red face with its ears, black horns, brows and mouth, yellow eyes and white fangs. Cut each from its own colour and build it from the back.
What is in the file
| Size | 96 × 100 mm (3.76 × 3.94 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 14 outlines |
| Cut length | 977 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 168 curve and line segments |
| Layers | 4: face, horns and mouth, eyes and fangs |
Measured from the file. PNG: 1,915 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | Over 1.5 mm | 248 mm | 100 | Vinyl, card and thin sheet |
| 1.91 × 2 in (49 × 51 mm) | Over 3 mm | 496 mm | 25 | Any material, including 3 mm wood and acrylic |
| 2.87 × 3 in (73 × 76 mm) | Over 4.6 mm | 744 mm | 9 | Any material, including 3 mm wood and acrylic |
| 3.82 × 4 in (97 × 102 mm) | Over 6.1 mm | 993 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.74 × 6 in (146 × 152 mm) | Over 9.1 mm | 1,489 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.65 × 8 in (194 × 203 mm) | Over 12 mm | 1,985 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.47 × 12 in (291 × 305 mm) | Over 18 mm | 2,978 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Devil face with horns and a grin Solid · one piece -
Simple devil face Solid · one piece -
Demon devil with long horns Solid · one piece -
She devil with lashes and lips Solid · one piece -
Devil horns, pair Solid · 2 pieces -
Devil horns on a headband Solid · one piece -
Devils tail with a spade tip Solid · one piece -
Devil horns and tail set Solid · 3 pieces
← Devil horns and tail monogram ring All 16 devils Devil face with horns and a grin →