Devil face with horns and a grin SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A grinning devil from the front: two ridged horns, pointed ears, slanted brows, narrow eyes with pupils, and a wide crescent grin with two fangs, on a face that narrows to a pointed chin. One piece.
What is in the file
| Size | 96 × 100 mm (3.76 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 811 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 142 curve and line segments |
| Symmetry | Mirror |
| Also found as | Devil head SVG |
Measured from the file. PNG: 1,915 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.96 × 1 in (24 × 25 mm) | 0.76 mm | 206 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.91 × 2 in (49 × 51 mm) | 1.5 mm | 412 mm | 25 | Vinyl, card and thin sheet |
| 2.87 × 3 in (73 × 76 mm) | 2.3 mm | 618 mm | 9 | Vinyl, card and thin sheet |
| 3.82 × 4 in (97 × 102 mm) | 3 mm | 824 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.74 × 6 in (146 × 152 mm) | 4.6 mm | 1,236 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.65 × 8 in (194 × 203 mm) | 6.1 mm | 1,648 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.47 × 12 in (291 × 305 mm) | 9.1 mm | 2,472 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Simple devil face Solid · one piece -
Demon devil with long horns Solid · one piece -
She devil with lashes and lips Solid · one piece -
Devil horns, pair Solid · 2 pieces -
Devil horns on a headband Solid · one piece -
Devils tail with a spade tip Solid · one piece -
Devil horns and tail set Solid · 3 pieces -
Little devil with a pitchfork Solid · one piece
← Layered red devil face in four colours All 16 devils Simple devil face →