Devil horns on a headband SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The fancy dress version: an arched band with a ridged horn standing on each side and a round stop at both ends. One piece, for a party invitation, a photo prop or a costume checklist.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 505 mm at this size |
| Narrowest part | 3.6 mm at this size |
| Nodes | 62 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.91 mm | 128 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.33 in (51 × 34 mm) | 1.8 mm | 257 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2 in (76 × 51 mm) | 2.7 mm | 385 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.66 in (102 × 68 mm) | 3.7 mm | 513 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.99 in (152 × 101 mm) | 5.5 mm | 770 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.32 in (203 × 135 mm) | 7.3 mm | 1,026 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.98 in (305 × 203 mm) | 11 mm | 1,539 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Devils tail with a spade tip Solid · one piece -
Devil horns and tail set Solid · 3 pieces -
Little devil with a pitchfork Solid · one piece -
Devil silhouette with a pitchfork Solid · one piece -
Devil heart with horns and a tail Solid · one piece -
Angel and devil hearts Solid · one piece -
Devil trident pitchfork Solid · one piece -
Devil mask with eye holes Solid · one piece
← Devil horns, pair All 16 devils Devils tail with a spade tip →