Devil mask with eye holes SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A half mask to wear: a brow that sweeps out to pointed cheeks, two slanted eye holes, a notch for the nose, two ridged horns and a small hole at each side for elastic. Cut it from card at about 180 mm wide.
What is in the file
| Size | 100 × 70 mm (3.94 × 2.76 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 744 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 127 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,423 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.7 in (25 × 18 mm) | 0.97 mm | 189 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.4 in (51 × 36 mm) | 1.9 mm | 378 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.1 in (76 × 53 mm) | 2.9 mm | 567 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.8 in (102 × 71 mm) | 3.9 mm | 756 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 4.2 in (152 × 107 mm) | 5.8 mm | 1,134 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.6 in (203 × 142 mm) | 7.7 mm | 1,512 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.4 in (305 × 213 mm) | 12 mm | 2,268 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Devil horns and tail monogram ring Solid · one piece -
Layered red devil face in four colours Layered · 14 pieces -
Devil face with horns and a grin Solid · one piece -
Simple devil face Solid · one piece -
Demon devil with long horns Solid · one piece -
She devil with lashes and lips Solid · one piece -
Devil horns, pair Solid · 2 pieces -
Devil horns on a headband Solid · one piece
← Devil trident pitchfork All 16 devils Devil horns and tail monogram ring →