Free devil SVG

Demon devil with long horns SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Demon devil with long horns, as a solid black shape
Demon devil with long horns. The preview is the SVG file itself.

A fiercer face for older trick-or-treaters: long ridged horns that sweep up and curl in, hollow cheeks, narrow slanted eyes, a ridge between the brows and an open mouth with six fangs.

What is in the file

Size85 × 100 mm (3.35 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length802 mm at this size
Narrowest part1 mm at this size
Nodes192 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,712 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (22 × 25 mm)0.25 mm204 mm110Too fine for most machines
1.7 × 2 in (43 × 51 mm)0.51 mm407 mm30Fine detail: vinyl and paper only, weed with care
2.55 × 3 in (65 × 76 mm)0.76 mm611 mm12Fine detail: vinyl and paper only, weed with care
3.4 × 4 in (86 × 102 mm)1 mm815 mm6Vinyl, card and thin sheet
5.1 × 6 in (130 × 152 mm)1.5 mm1,222 mm2Vinyl, card and thin sheet
6.8 × 8 in (173 × 203 mm)2 mm1,630 mm1Vinyl, card and thin sheet
10.2 × 12 in (259 × 305 mm)3 mm2,444 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More devil SVG files

← Simple devil face All 16 devils She devil with lashes and lips →