Little devil with a pitchfork SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A small smiling devil standing with a hand on its hip and a three-pronged fork held upright in the other: horns, pointed ears, a round belly and a tail that curls out to the side. For children’s Halloween shirts and treat bags.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 95 × 100 mm (3.72 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 1,003 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 327 curve and line segments |
Measured from the file. PNG: 1,896 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.95 × 1 in (24 × 25 mm) | 0.79 mm | 255 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.89 × 2 in (48 × 51 mm) | 1.6 mm | 510 mm | 25 | Vinyl, card and thin sheet |
| 2.84 × 3 in (72 × 76 mm) | 2.4 mm | 764 mm | 12 | Vinyl, card and thin sheet |
| 3.78 × 4 in (96 × 102 mm) | 3.1 mm | 1,019 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.68 × 6 in (144 × 152 mm) | 4.7 mm | 1,529 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.57 × 8 in (192 × 203 mm) | 6.3 mm | 2,038 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.35 × 12 in (288 × 305 mm) | 9.4 mm | 3,057 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Devil silhouette with a pitchfork Solid · one piece -
Devil heart with horns and a tail Solid · one piece -
Angel and devil hearts Solid · one piece -
Devil trident pitchfork Solid · one piece -
Devil mask with eye holes Solid · one piece -
Devil horns and tail monogram ring Solid · one piece -
Layered red devil face in four colours Layered · 14 pieces -
Devil face with horns and a grin Solid · one piece
← Devil horns and tail set All 16 devils Devil silhouette with a pitchfork →