Angel and devil hearts SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two hearts side by side: one with a tilted halo and a small wing, one with horns and a spade-tipped tail. A slim seam parts them where they overlap, with a bridge above and below. For a couple, twins or best friends.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.91 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 478 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 107 curve and line segments |
Measured from the file. PNG: 2,000 × 1,012 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 12 mm) | 0.64 mm | 121 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.97 in (51 × 25 mm) | 1.3 mm | 243 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.46 in (76 × 37 mm) | 1.9 mm | 364 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.94 in (102 × 49 mm) | 2.5 mm | 486 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.92 in (152 × 74 mm) | 3.8 mm | 728 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 3.89 in (203 × 99 mm) | 5.1 mm | 971 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.83 in (305 × 148 mm) | 7.6 mm | 1,457 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Devil trident pitchfork Solid · one piece -
Devil mask with eye holes Solid · one piece -
Devil horns and tail monogram ring Solid · one piece -
Layered red devil face in four colours Layered · 14 pieces -
Devil face with horns and a grin Solid · one piece -
Simple devil face Solid · one piece -
Demon devil with long horns Solid · one piece -
She devil with lashes and lips Solid · one piece
← Devil heart with horns and a tail All 16 devils Devil trident pitchfork →