Devil heart with horns and a tail SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A heart with two ridged horns on its lobes, glaring eyes, a smirk and a tail that curls out from its point and ends in a spade. For anti-Valentine cards and Halloween weddings.
What is in the file
| Size | 94 × 100 mm (3.69 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 771 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 127 curve and line segments |
Measured from the file. PNG: 1,879 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.94 × 1 in (24 × 25 mm) | 0.71 mm | 196 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.87 × 2 in (48 × 51 mm) | 1.4 mm | 392 mm | 25 | Vinyl, card and thin sheet |
| 2.81 × 3 in (71 × 76 mm) | 2.1 mm | 588 mm | 12 | Vinyl, card and thin sheet |
| 3.75 × 4 in (95 × 102 mm) | 2.8 mm | 783 mm | 6 | Vinyl, card and thin sheet |
| 5.62 × 6 in (143 × 152 mm) | 4.3 mm | 1,175 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.5 × 8 in (190 × 203 mm) | 5.7 mm | 1,567 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.24 × 12 in (286 × 305 mm) | 8.5 mm | 2,350 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Angel and devil hearts Solid · one piece -
Devil trident pitchfork Solid · one piece -
Devil mask with eye holes Solid · one piece -
Devil horns and tail monogram ring Solid · one piece -
Layered red devil face in four colours Layered · 14 pieces -
Devil face with horns and a grin Solid · one piece -
Simple devil face Solid · one piece -
Demon devil with long horns Solid · one piece
← Devil silhouette with a pitchfork All 16 devils Angel and devil hearts →