Devil horns and tail set SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two horns and a curling tail as three loose pieces, sized to dress up a name: horns on the first letter, tail hanging from the last. Move them where you need them.
What is in the file
| Size | 41 × 100 mm (1.62 × 3.94 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 7: 3 outer edges and 4 cut-outs |
| Cut length | 499 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 103 curve and line segments |
Measured from the file. PNG: 869 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.41 × 1 in (10 × 25 mm) | 0.74 mm | 127 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 0.82 × 2 in (21 × 51 mm) | 1.5 mm | 253 mm | 55 | Vinyl, card and thin sheet |
| 1.24 × 3 in (31 × 76 mm) | 2.2 mm | 380 mm | 24 | Vinyl, card and thin sheet |
| 1.65 × 4 in (42 × 102 mm) | 2.9 mm | 507 mm | 12 | Vinyl, card and thin sheet |
| 2.47 × 6 in (63 × 152 mm) | 4.4 mm | 760 mm | 4 | Any material, including 3 mm wood and acrylic |
| 3.3 × 8 in (84 × 203 mm) | 5.9 mm | 1,014 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.94 × 12 in (126 × 305 mm) | 8.8 mm | 1,521 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More devil SVG files
-
Little devil with a pitchfork Solid · one piece -
Devil silhouette with a pitchfork Solid · one piece -
Devil heart with horns and a tail Solid · one piece -
Angel and devil hearts Solid · one piece -
Devil trident pitchfork Solid · one piece -
Devil mask with eye holes Solid · one piece -
Devil horns and tail monogram ring Solid · one piece -
Layered red devil face in four colours Layered · 14 pieces
← Devils tail with a spade tip All 16 devils Little devil with a pitchfork →