Dad in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Dad” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 39 mm (3.94 × 1.53 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 6: 3 outer edges and 3 cut-outs |
| Cut length | 518 mm at this size |
| Narrowest part | 4.6 mm at this size |
| Nodes | 72 curve and line segments |
Measured from the file. PNG: 2,000 × 823 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.39 in (25 × 10 mm) | 1.2 mm | 132 mm | 200 | Vinyl, card and thin sheet |
| 2 × 0.78 in (51 × 20 mm) | 2.3 mm | 263 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.16 in (76 × 30 mm) | 3.5 mm | 395 mm | 24 | Any material, including 3 mm wood and acrylic |
| 4 × 1.55 in (102 × 39 mm) | 4.7 mm | 526 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.33 in (152 × 59 mm) | 7 mm | 789 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.1 in (203 × 79 mm) | 9.3 mm | 1,053 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.66 in (305 × 118 mm) | 14 mm | 1,579 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Dad SVG files
-
Dad in Amatic SC Solid · 3 pieces
-
Dad in block capitals Solid · 3 pieces
-
Dad with a swash underline Solid · 2 pieces
-
Dad with stars Solid · 8 pieces
-
Dad outline lettering Outline · 6 pieces
-
Dad stencil plate Solid · one piece
-
Dad with a drop shadow Layered · 4 pieces
-
Dad with a handlebar moustache Solid · 3 pieces