Dad with a swash underline SVG
“Dad” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.38 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 5: 2 outer edges and 3 cut-outs |
| Cut length | 789 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 245 curve and line segments |
Measured from the file. PNG: 2,000 × 1,238 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.76 mm | 200 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.21 in (51 × 31 mm) | 1.5 mm | 401 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.81 in (76 × 46 mm) | 2.3 mm | 601 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.42 in (102 × 61 mm) | 3 mm | 802 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.62 in (152 × 92 mm) | 4.6 mm | 1,202 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.83 in (203 × 123 mm) | 6.1 mm | 1,603 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.25 in (305 × 184 mm) | 9.1 mm | 2,405 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Dad with stars 
Dad outline lettering 
Dad stencil plate 
Dad with a drop shadow 
Dad in Pacifico 
Dad in Lobster 
Dad in Kaushan Script 
Dad in Lilita One 