Dad outline lettering SVG
“Dad” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 42 mm (3.94 × 1.66 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 12: 6 outer edges and 6 cut-outs |
| Cut length | 954 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 172 curve and line segments |
Measured from the file. PNG: 2,000 × 887 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.42 in (25 × 11 mm) | 0.36 mm | 242 mm | 190 | Too fine for most machines |
| 2 × 0.84 in (51 × 21 mm) | 0.71 mm | 485 mm | 55 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.26 in (76 × 32 mm) | 1.1 mm | 727 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.68 in (102 × 43 mm) | 1.4 mm | 969 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.53 in (152 × 64 mm) | 2.1 mm | 1,454 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.37 in (203 × 86 mm) | 2.8 mm | 1,939 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.05 in (305 × 128 mm) | 4.3 mm | 2,908 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Dad stencil plate 
Dad with a drop shadow 
Dad in Pacifico 
Dad in Lobster 
Dad in Kaushan Script 
Dad in Lilita One 
Dad in Alfa Slab One 
Dad in Amatic SC 