Free Dad SVG

Dad with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad with stars, as a solid black shape
Dad with stars. The preview is the SVG file itself.

“Dad” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 76 mm (3.94 × 2.98 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length868 mm at this size
Narrowest part2.3 mm at this size
Nodes157 curve and line segments

Measured from the file. PNG: 2,000 × 1,535 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.58 mm220 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.52 in (51 × 39 mm)1.2 mm441 mm35Vinyl, card and thin sheet
3 × 2.27 in (76 × 58 mm)1.8 mm661 mm12Vinyl, card and thin sheet
4 × 3.03 in (102 × 77 mm)2.3 mm882 mm6Vinyl, card and thin sheet
6 × 4.55 in (152 × 116 mm)3.5 mm1,323 mm2Any material, including 3 mm wood and acrylic
8 × 6.06 in (203 × 154 mm)4.7 mm1,764 mm1Any material, including 3 mm wood and acrylic
12 × 9.1 in (305 × 231 mm)7 mm2,646 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad SVG files

← Dad with a swash underline All 13 Dad designs Dad outline lettering →