Dad in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Dad” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 44 mm (3.94 × 1.74 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 6: 3 outer edges and 3 cut-outs |
| Cut length | 501 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 80 curve and line segments |
Measured from the file. PNG: 2,000 × 927 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.44 in (25 × 11 mm) | Over 1.5 mm | 127 mm | 190 | Vinyl, card and thin sheet |
| 2 × 0.88 in (51 × 22 mm) | Over 3 mm | 255 mm | 55 | Any material, including 3 mm wood and acrylic |
| 3 × 1.33 in (76 × 34 mm) | Over 4.6 mm | 382 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 1.77 in (102 × 45 mm) | Over 6.1 mm | 509 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.65 in (152 × 67 mm) | Over 9.1 mm | 764 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.54 in (203 × 90 mm) | Over 12 mm | 1,018 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.3 in (305 × 135 mm) | Over 18 mm | 1,527 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Dad SVG files
-
Dad in Alfa Slab One Solid · 3 pieces
-
Dad in Amatic SC Solid · 3 pieces
-
Dad in block capitals Solid · 3 pieces
-
Dad with a swash underline Solid · 2 pieces
-
Dad with stars Solid · 8 pieces
-
Dad outline lettering Outline · 6 pieces
-
Dad stencil plate Solid · one piece
-
Dad with a drop shadow Layered · 4 pieces
← Dad in Kaushan Script All 13 Dad designs Dad in Alfa Slab One →