Free Dad SVG

Dad in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad in Amatic SC, as a solid black shape
Dad in Amatic SC. The preview is the SVG file itself.

“Dad” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 76 mm (3.94 × 3 in), scales to any size
Pieces3 separate pieces
Outlines to cut6: 3 outer edges and 3 cut-outs
Cut length930 mm at this size
Narrowest part4.7 mm at this size
Nodes158 curve and line segments

Measured from the file. PNG: 2,000 × 1,540 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)1.2 mm236 mm120Vinyl, card and thin sheet
2 × 1.52 in (51 × 39 mm)2.4 mm472 mm35Vinyl, card and thin sheet
3 × 2.28 in (76 × 58 mm)3.6 mm709 mm12Any material, including 3 mm wood and acrylic
4 × 3.04 in (102 × 77 mm)4.8 mm945 mm6Any material, including 3 mm wood and acrylic
6 × 4.57 in (152 × 116 mm)7.2 mm1,417 mm2Any material, including 3 mm wood and acrylic
8 × 6.09 in (203 × 155 mm)9.6 mm1,890 mm1Any material, including 3 mm wood and acrylic
12 × 9.13 in (305 × 232 mm)14 mm2,835 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad SVG files

← Dad in Alfa Slab One All 13 Dad designs Dad in block capitals →