Free Dad SVG

Dad in Pacifico SVG

Dad in Pacifico, as a solid black shape — Dad in Pacifico. The preview is the SVG file itself.

“Dad” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 50 mm (3.94 × 1.97 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	5: 2 outer edges and 3 cut-outs
Cut length	627 mm at this size
Narrowest part	3.7 mm at this size
Nodes	148 curve and line segments

Measured from the file. PNG: 2,000 × 1,040 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.5 in (25 × 13 mm)	0.94 mm	159 mm	170	Fine detail: vinyl and paper only, weed with care
2 × 1 in (51 × 25 mm)	1.9 mm	319 mm	50	Vinyl, card and thin sheet
3 × 1.5 in (76 × 38 mm)	2.8 mm	478 mm	21	Vinyl, card and thin sheet
4 × 2 in (102 × 51 mm)	3.8 mm	637 mm	10	Any material, including 3 mm wood and acrylic
6 × 3.01 in (152 × 76 mm)	5.6 mm	956 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.01 in (203 × 102 mm)	7.5 mm	1,274 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.01 in (305 × 153 mm)	11 mm	1,911 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad SVG files

← Dad with a drop shadow All 12 Dad designs Dad in Lobster →