Free Dad SVG

Dad with a handlebar moustache SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad with a handlebar moustache, as a solid black shape — Dad with a handlebar moustache. The preview is the SVG file itself.

“Dad” with a handlebar moustache above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 65 mm (3.94 × 2.56 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	5: 3 outer edges and 2 cut-outs
Cut length	825 mm at this size
Narrowest part	2.2 mm at this size
Nodes	134 curve and line segments

Measured from the file. PNG: 2,000 × 1,329 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 17 mm)	0.56 mm	210 mm	140	Fine detail: vinyl and paper only, weed with care
2 × 1.3 in (51 × 33 mm)	1.1 mm	419 mm	40	Vinyl, card and thin sheet
3 × 1.95 in (76 × 50 mm)	1.7 mm	629 mm	15	Vinyl, card and thin sheet
4 × 2.6 in (102 × 66 mm)	2.2 mm	838 mm	8	Vinyl, card and thin sheet
6 × 3.91 in (152 × 99 mm)	3.4 mm	1,257 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.21 in (203 × 132 mm)	4.5 mm	1,676 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.81 in (305 × 198 mm)	6.7 mm	2,515 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad SVG files

← Dad with a drop shadow All 13 Dad designs Dad in Pacifico →