Free Dad SVG

Dad in block capitals SVG

Dad in block capitals, as a solid black shape — Dad in block capitals. The preview is the SVG file itself.

“DAD” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 62 mm (3.94 × 2.43 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	6: 3 outer edges and 3 cut-outs
Cut length	810 mm at this size
Narrowest part	Nothing narrower than 6 mm at this size
Nodes	49 curve and line segments

Measured from the file. PNG: 2,000 × 1,262 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.62 in (25 × 16 mm)	Over 1.5 mm	206 mm	140	Vinyl, card and thin sheet
2 × 1.23 in (51 × 31 mm)	Over 3 mm	411 mm	40	Any material, including 3 mm wood and acrylic
3 × 1.85 in (76 × 47 mm)	Over 4.6 mm	617 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.46 in (102 × 63 mm)	Over 6.1 mm	823 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.7 in (152 × 94 mm)	Over 9.1 mm	1,234 mm	3	Any material, including 3 mm wood and acrylic
8 × 4.93 in (203 × 125 mm)	Over 12 mm	1,646 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.39 in (305 × 188 mm)	Over 18 mm	2,469 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad SVG files

← Dad in Amatic SC All 12 Dad designs Dad with a swash underline →