Free Dad SVG

Dad stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dad stencil plate, as a solid black shape
Dad stencil plate. The preview is the SVG file itself.

A rounded plate with “DAD” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 61 mm (3.94 × 2.39 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length931 mm at this size
Narrowest part1.7 mm at this size
Nodes90 curve and line segments

Measured from the file. PNG: 2,000 × 1,242 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.43 mm236 mm150Too fine for most machines
2 × 1.21 in (51 × 31 mm)0.86 mm473 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.82 in (76 × 46 mm)1.3 mm709 mm18Vinyl, card and thin sheet
4 × 2.42 in (102 × 62 mm)1.7 mm946 mm8Vinyl, card and thin sheet
6 × 3.64 in (152 × 92 mm)2.6 mm1,419 mm3Vinyl, card and thin sheet
8 × 4.85 in (203 × 123 mm)3.5 mm1,892 mm2Any material, including 3 mm wood and acrylic
12 × 7.27 in (305 × 185 mm)5.2 mm2,838 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad SVG files

← Dad outline lettering All 13 Dad designs Dad with a drop shadow →