Free cowboy hat SVG

Tall cowboy hat with a star SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Tall cowboy hat with a star, as a solid black shape
Tall cowboy hat with a star. The preview is the SVG file itself.

A ten-gallon hat with a high crown and a narrower brim, with a five-point star cut out of the front of the crown above the band. For sheriff costumes and wanted posters.

What is in the file

Size100 × 86 mm (3.94 × 3.38 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length669 mm at this size
Narrowest part1 mm at this size
Nodes110 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,729 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.86 in (25 × 22 mm)0.25 mm170 mm110Too fine for most machines
2 × 1.72 in (51 × 44 mm)0.51 mm340 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.58 in (76 × 65 mm)0.76 mm510 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.44 in (102 × 87 mm)1 mm680 mm6Vinyl, card and thin sheet
6 × 5.15 in (152 × 131 mm)1.5 mm1,020 mm2Vinyl, card and thin sheet
8 × 6.87 in (203 × 175 mm)2 mm1,359 mm1Vinyl, card and thin sheet
12 × 10.31 in (305 × 262 mm)3 mm2,039 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Straw cowboy hat All 13 cowboy hats Cowboy hat with a moustache and bandana →