Free cowboy hat SVG

Cowboy hat with a moustache and bandana SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cowboy hat with a moustache and bandana, as a solid black shape
Cowboy hat with a moustache and bandana. The preview is the SVG file itself.

A cowboy with no face: the hat, a handlebar moustache under it and a spotted neckerchief knotted at one side. Three separate pieces by design, to place on a shirt or a pumpkin.

What is in the file

Size80 × 100 mm (3.14 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut15: 3 outer edges and 12 cut-outs
Cut length746 mm at this size
Narrowest part1 mm at this size
Nodes182 curve and line segments

Measured from the file. PNG: 1,610 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.8 × 1 in (20 × 25 mm)0.25 mm189 mm120Too fine for most machines
1.59 × 2 in (40 × 51 mm)0.51 mm379 mm30Fine detail: vinyl and paper only, weed with care
2.39 × 3 in (61 × 76 mm)0.76 mm568 mm12Fine detail: vinyl and paper only, weed with care
3.19 × 4 in (81 × 102 mm)1 mm758 mm6Vinyl, card and thin sheet
4.78 × 6 in (121 × 152 mm)1.5 mm1,137 mm2Vinyl, card and thin sheet
6.38 × 8 in (162 × 203 mm)2 mm1,516 mm1Vinyl, card and thin sheet
9.56 × 12 in (243 × 305 mm)3 mm2,274 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Tall cowboy hat with a star All 13 cowboy hats Cowboy hat and boot →