Free cowboy hat SVG

Cowboy hat on a horseshoe SVG

Cowboy hat on a horseshoe, as a solid black shape — Cowboy hat on a horseshoe. The preview is the SVG file itself.

A horseshoe with its open end up and seven nail holes, with a hat hung on one of its heels at a tilt. Welded into one piece, for good luck signs and barn doors.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	727 mm at this size
Narrowest part	1.3 mm at this size
Nodes	175 curve and line segments

Measured from the file. PNG: 1,740 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.33 mm	185 mm	110	Too fine for most machines
1.73 × 2 in (44 × 51 mm)	0.66 mm	369 mm	30	Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)	0.99 mm	554 mm	12	Fine detail: vinyl and paper only, weed with care
3.46 × 4 in (88 × 102 mm)	1.3 mm	739 mm	6	Vinyl, card and thin sheet
5.19 × 6 in (132 × 152 mm)	2 mm	1,108 mm	2	Vinyl, card and thin sheet
6.92 × 8 in (176 × 203 mm)	2.6 mm	1,477 mm	1	Vinyl, card and thin sheet
10.38 × 12 in (264 × 305 mm)	4 mm	2,216 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Cowboy hat monogram frame All 13 cowboy hats Layered cowboy hat in three colours →