Free cowboy hat SVG

Classic cowboy hat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Classic cowboy hat, as a solid black shape
Classic cowboy hat. The preview is the SVG file itself.

A western hat seen from the front: a brim that dips in the middle and curls up at both ends, and a creased crown with its band marked by two fine slots. The one to set on a name, an animal or a pumpkin.

What is in the file

Size100 × 61 mm (3.94 × 2.42 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length552 mm at this size
Narrowest part1 mm at this size
Nodes99 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,258 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 16 mm)0.25 mm140 mm140Too fine for most machines
2 × 1.23 in (51 × 31 mm)0.51 mm280 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.84 in (76 × 47 mm)0.76 mm421 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.46 in (102 × 62 mm)1 mm561 mm8Vinyl, card and thin sheet
6 × 3.68 in (152 × 94 mm)1.5 mm841 mm3Vinyl, card and thin sheet
8 × 4.91 in (203 × 125 mm)2 mm1,122 mm2Vinyl, card and thin sheet
12 × 7.37 in (305 × 187 mm)3 mm1,682 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Layered cowboy hat in three colours All 13 cowboy hats Cowboy hat silhouette →