Free cowboy hat SVG

Cowboy hat in a lasso SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cowboy hat in a lasso, as a solid black shape
Cowboy hat in a lasso. The preview is the SVG file itself.

The hat held inside two coils of rope, with a knot and a loose end at the bottom. The tips of the brim are welded to the rope, so it is one piece. A round badge for rodeo shirts.

What is in the file

Size91 × 100 mm (3.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,491 mm at this size
Narrowest part1 mm at this size
Nodes150 curve and line segments
Also found asRodeo SVG

Measured from the file. PNG: 1,821 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)0.25 mm379 mm110Too fine for most machines
1.81 × 2 in (46 × 51 mm)0.51 mm757 mm30Fine detail: vinyl and paper only, weed with care
2.72 × 3 in (69 × 76 mm)0.76 mm1,136 mm12Fine detail: vinyl and paper only, weed with care
3.63 × 4 in (92 × 102 mm)1 mm1,515 mm6Vinyl, card and thin sheet
5.44 × 6 in (138 × 152 mm)1.5 mm2,272 mm2Vinyl, card and thin sheet
7.26 × 8 in (184 × 203 mm)2 mm3,030 mm1Vinyl, card and thin sheet
10.88 × 12 in (276 × 305 mm)3 mm4,545 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Cowboy hat and boot All 13 cowboy hats Cowboy hat with a feather →