Free cowboy hat SVG

Layered cowboy hat in three colours SVG

Layered cowboy hat in three colours, in layered colours
Layered cowboy hat in three colours. The preview is the SVG file itself.

Three layers to stack: a tan felt hat tipped to one side, a dark band across the crown, and a gold star to pin on the band.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 66 mm (3.94 × 2.61 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length456 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes71 curve and line segments
Layers3: hat, band and star

Measured from the file. PNG: 2,000 × 1,350 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)Over 1.5 mm116 mm140Vinyl, card and thin sheet
2 × 1.32 in (51 × 34 mm)Over 3 mm232 mm40Any material, including 3 mm wood and acrylic
3 × 1.99 in (76 × 50 mm)Over 4.6 mm347 mm15Any material, including 3 mm wood and acrylic
4 × 2.65 in (102 × 67 mm)Over 6.1 mm463 mm8Any material, including 3 mm wood and acrylic
6 × 3.97 in (152 × 101 mm)Over 9.1 mm695 mm2Any material, including 3 mm wood and acrylic
8 × 5.3 in (203 × 135 mm)Over 12 mm927 mm2Any material, including 3 mm wood and acrylic
12 × 7.94 in (305 × 202 mm)Over 18 mm1,390 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Cowboy hat on a horseshoe All 13 cowboy hats Classic cowboy hat →