Free cowboy hat SVG

Cowboy hat and boot SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cowboy hat and boot, as a solid black shape
Cowboy hat and boot. The preview is the SVG file itself.

A hat leaning against the toe of a western boot. A slim gap follows the edge of the hat where it crosses the boot, so the two cut as separate pieces by design.

What is in the file

Size100 × 84 mm (3.94 × 3.31 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length641 mm at this size
Narrowest part1 mm at this size
Nodes147 curve and line segments

Measured from the file. PNG: 2,000 × 1,694 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.25 mm163 mm110Too fine for most machines
2 × 1.68 in (51 × 43 mm)0.51 mm326 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.52 in (76 × 64 mm)0.76 mm488 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.36 in (102 × 85 mm)1 mm651 mm6Vinyl, card and thin sheet
6 × 5.05 in (152 × 128 mm)1.5 mm977 mm2Vinyl, card and thin sheet
8 × 6.73 in (203 × 171 mm)2 mm1,303 mm1Vinyl, card and thin sheet
12 × 10.09 in (305 × 256 mm)3 mm1,954 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Cowboy hat with a moustache and bandana All 13 cowboy hats Cowboy hat in a lasso →