Free cowboy hat SVG

Cowboy hat monogram frame SVG

Cowboy hat monogram frame, as a solid black shape — Cowboy hat monogram frame. The preview is the SVG file itself.

A round frame about 5 mm wide with a hat sitting on top of it, tipped a little to one side. The middle is open for an initial or a name added in your own software.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.84 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	652 mm at this size
Narrowest part	1.4 mm at this size
Nodes	95 curve and line segments

Measured from the file. PNG: 1,465 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	0.36 mm	166 mm	130	Too fine for most machines
1.44 × 2 in (37 × 51 mm)	0.71 mm	331 mm	35	Fine detail: vinyl and paper only, weed with care
2.17 × 3 in (55 × 76 mm)	1.1 mm	497 mm	15	Vinyl, card and thin sheet
2.89 × 4 in (73 × 102 mm)	1.4 mm	662 mm	6	Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)	2.1 mm	994 mm	2	Vinyl, card and thin sheet
5.78 × 8 in (147 × 203 mm)	2.8 mm	1,325 mm	2	Vinyl, card and thin sheet
8.66 × 12 in (220 × 305 mm)	4.3 mm	1,987 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Cowboy hat with a feather All 13 cowboy hats Cowboy hat on a horseshoe →