Free cowboy hat SVG

Cowgirl hat with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cowgirl hat with hearts, as a solid black shape
Cowgirl hat with hearts. The preview is the SVG file itself.

A hat with five hearts cut out along the band and a chin cord that hangs in a loop below the brim, drawn through a round bead with two tassels.

What is in the file

Size100 × 98 mm (3.94 × 3.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length575 mm at this size
Narrowest part1.5 mm at this size
Nodes114 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,963 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.38 mm146 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.76 mm292 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)1.1 mm438 mm9Vinyl, card and thin sheet
4 × 3.92 in (102 × 100 mm)1.5 mm584 mm4Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)2.3 mm876 mm2Vinyl, card and thin sheet
8 × 7.85 in (203 × 199 mm)3 mm1,168 mm1Any material, including 3 mm wood and acrylic
12 × 11.77 in (305 × 299 mm)4.6 mm1,753 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cowboy hat SVG files

← Cowboy hat outline All 13 cowboy hats Straw cowboy hat →