Free bow SVG

Christmas gift bow with four loops SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Christmas gift bow with four loops, as a solid black shape
Christmas gift bow with four loops. The preview is the SVG file itself.

A double bow: two large open loops above two smaller ones, with short pointed tails. The full, festive bow that sits on top of a present.

What is in the file

Size100 × 77 mm (3.94 × 3.01 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length752 mm at this size
Narrowest part2.9 mm at this size
Nodes113 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,548 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 19 mm)0.74 mm191 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.53 in (51 × 39 mm)1.5 mm382 mm35Vinyl, card and thin sheet
3 × 2.3 in (76 × 58 mm)2.2 mm573 mm12Vinyl, card and thin sheet
4 × 3.06 in (102 × 78 mm)2.9 mm764 mm6Vinyl, card and thin sheet
6 × 4.59 in (152 × 117 mm)4.4 mm1,146 mm2Any material, including 3 mm wood and acrylic
8 × 6.12 in (203 × 155 mm)5.9 mm1,528 mm1Any material, including 3 mm wood and acrylic
12 × 9.18 in (305 × 233 mm)8.8 mm2,292 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Big bow with long tails All 15 bows Polka dot bow →