Chevron bow SVG
Zigzag stripes run across the loops and tails inside an outline that holds them together, with a solid knot. Lay it over a bright colour.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 69 mm (3.94 × 2.7 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 1,106 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 164 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,398 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.69 in (25 × 17 mm) | 0.74 mm | 281 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.37 in (51 × 35 mm) | 1.5 mm | 562 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.06 in (76 × 52 mm) | 2.2 mm | 843 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.75 in (102 × 70 mm) | 2.9 mm | 1,124 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.12 in (152 × 105 mm) | 4.4 mm | 1,686 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.5 in (203 × 140 mm) | 5.9 mm | 2,247 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.24 in (305 × 209 mm) | 8.8 mm | 3,371 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Classic bow tie 
Spotted bow tie 
Hair bow template in three pieces 
Bow outline 
Thin ribbon bow 
Bow tie outline 
Classic ribbon bow 
Bow with open loops 