Hair bow template in three pieces SVG
Pattern pieces for a faux leather hair bow: a long strip to fold into loops, a tail piece and a centre strap. Fold the strip ends to the middle, lay it on the tails, wrap the strap round and glue.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.15 in), scales to any size |
|---|---|
| Pieces | 3 separate pieces |
| Outlines to cut | 3 outlines |
| Cut length | 557 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 46 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | Over 1.5 mm | 141 mm | 120 | Vinyl, card and thin sheet |
| 2 × 1.6 in (51 × 41 mm) | Over 3 mm | 283 mm | 30 | Any material, including 3 mm wood and acrylic |
| 3 × 2.4 in (76 × 61 mm) | Over 4.6 mm | 424 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.2 in (102 × 81 mm) | Over 6.1 mm | 566 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.8 in (152 × 122 mm) | Over 9.1 mm | 849 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.4 in (203 × 163 mm) | Over 12 mm | 1,132 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.6 in (305 × 244 mm) | Over 18 mm | 1,698 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.