Free bow SVG

Simple bow with short tails SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Simple bow with short tails, as a solid black shape
Simple bow with short tails. The preview is the SVG file itself.

Rounded loops, a square knot and two short tails cut on the slant. Small and neat, for the corner of a gift tag or the top of a monogram.

What is in the file

Size100 × 47 mm (3.94 × 1.83 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length452 mm at this size
Narrowest part1.6 mm at this size
Nodes49 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 971 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.41 mm115 mm180Too fine for most machines
2 × 0.93 in (51 × 24 mm)0.81 mm230 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.39 in (76 × 35 mm)1.2 mm344 mm21Vinyl, card and thin sheet
4 × 1.86 in (102 × 47 mm)1.6 mm459 mm10Vinyl, card and thin sheet
6 × 2.79 in (152 × 71 mm)2.4 mm689 mm4Vinyl, card and thin sheet
8 × 3.72 in (203 × 94 mm)3.3 mm918 mm3Any material, including 3 mm wood and acrylic
12 × 5.58 in (305 × 142 mm)4.9 mm1,378 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Bow silhouette All 15 bows Hair bow →