Free bow SVG

Big bow with long tails SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Big bow with long tails, as a solid black shape
Big bow with long tails. The preview is the SVG file itself.

Open loops over two long tails that hang well below the knot and curl apart, each with a forked end. For wreaths, door signs and the top of a banner.

What is in the file

Size99 × 100 mm (3.91 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length792 mm at this size
Narrowest part1.6 mm at this size
Nodes85 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,987 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.99 × 1 in (25 × 25 mm)0.41 mm201 mm100Too fine for most machines
1.99 × 2 in (50 × 51 mm)0.81 mm402 mm25Fine detail: vinyl and paper only, weed with care
2.98 × 3 in (76 × 76 mm)1.2 mm604 mm9Vinyl, card and thin sheet
3.97 × 4 in (101 × 102 mm)1.6 mm805 mm4Vinyl, card and thin sheet
5.96 × 6 in (151 × 152 mm)2.4 mm1,207 mm1Vinyl, card and thin sheet
7.94 × 8 in (202 × 203 mm)3.3 mm1,609 mm1Any material, including 3 mm wood and acrylic
11.92 × 12 in (303 × 305 mm)4.9 mm2,414 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Hair bow All 15 bows Christmas gift bow with four loops →