Classic bow tie SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A neat butterfly bow tie: two square-ended wings and a knot, with fold lines cut into each wing. For wedding stationery, baby showers and little gentlemen.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.8 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 506 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 52 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 958 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 0.3 mm | 129 mm | 180 | Too fine for most machines |
| 2 × 0.92 in (51 × 23 mm) | 0.61 mm | 257 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.37 in (76 × 35 mm) | 0.91 mm | 386 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.83 in (102 × 47 mm) | 1.2 mm | 514 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.75 in (152 × 70 mm) | 1.8 mm | 771 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.66 in (203 × 93 mm) | 2.4 mm | 1,028 mm | 3 | Vinyl, card and thin sheet |
| 12 × 5.5 in (305 × 140 mm) | 3.7 mm | 1,542 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.