Free bow SVG

Thin ribbon bow SVG

Thin ribbon bow, drawn as a line — Thin ribbon bow. The preview is the SVG file itself.

A bow tied from a single thin line: two loops and two long wavy tails with round ends. Delicate and hand-drawn in feel, for invitations and stationery.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.24 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	731 mm at this size
Narrowest part	3 mm at this size
Nodes	97 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,658 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.76 mm	186 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.64 in (51 × 42 mm)	1.5 mm	371 mm	30	Vinyl, card and thin sheet
3 × 2.47 in (76 × 63 mm)	2.3 mm	557 mm	12	Vinyl, card and thin sheet
4 × 3.29 in (102 × 84 mm)	3 mm	743 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.93 in (152 × 125 mm)	4.6 mm	1,114 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.58 in (203 × 167 mm)	6.1 mm	1,485 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.86 in (305 × 251 mm)	9.1 mm	2,228 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Bow outline All 15 bows Bow tie outline →