Free bow SVG

Bow tie outline SVG

Bow tie outline, drawn as a line — Bow tie outline. The preview is the SVG file itself.

A bow tie drawn as an outline with its knot and fold lines. Simple enough to cut from felt, trace onto fabric or stitch on a card.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 46 mm (3.94 × 1.8 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	775 mm at this size
Narrowest part	2.4 mm at this size
Nodes	76 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 958 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.46 in (25 × 12 mm)	0.61 mm	197 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.92 in (51 × 23 mm)	1.2 mm	394 mm	50	Vinyl, card and thin sheet
3 × 1.37 in (76 × 35 mm)	1.8 mm	591 mm	21	Vinyl, card and thin sheet
4 × 1.83 in (102 × 47 mm)	2.4 mm	787 mm	12	Vinyl, card and thin sheet
6 × 2.75 in (152 × 70 mm)	3.7 mm	1,181 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.66 in (203 × 93 mm)	4.9 mm	1,575 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.5 in (305 × 140 mm)	7.3 mm	2,362 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Thin ribbon bow All 15 bows Classic ribbon bow →