Bow with open loops SVG
The ribbon is drawn as a band, so you can see through each loop. Lighter than the solid bow and good at showing a second colour behind.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 71 mm (3.94 × 2.78 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 669 mm at this size |
| Narrowest part | 2.5 mm at this size |
| Nodes | 85 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,437 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.71 in (25 × 18 mm) | 0.64 mm | 170 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.41 in (51 × 36 mm) | 1.3 mm | 340 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.12 in (76 × 54 mm) | 1.9 mm | 510 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.83 in (102 × 72 mm) | 2.5 mm | 680 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.24 in (152 × 108 mm) | 3.8 mm | 1,020 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.66 in (203 × 144 mm) | 5.1 mm | 1,359 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.48 in (305 × 215 mm) | 7.6 mm | 2,039 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bow silhouette 
Simple bow with short tails 
Hair bow 
Big bow with long tails 
Christmas gift bow with four loops 
Polka dot bow 
Chevron bow 
Classic bow tie 