Free bow SVG

Polka dot bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Polka dot bow, as a solid black shape
Polka dot bow. The preview is the SVG file itself.

The classic bow scattered with round holes in a staggered grid. Every dot sits whole inside the ribbon, so none is clipped by an edge.

What is in the file

Size100 × 69 mm (3.94 × 2.7 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length756 mm at this size
Narrowest part2.4 mm at this size
Nodes119 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,398 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.69 in (25 × 17 mm)0.61 mm192 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.37 in (51 × 35 mm)1.2 mm384 mm35Vinyl, card and thin sheet
3 × 2.06 in (76 × 52 mm)1.8 mm576 mm15Vinyl, card and thin sheet
4 × 2.75 in (102 × 70 mm)2.4 mm768 mm8Vinyl, card and thin sheet
6 × 4.12 in (152 × 105 mm)3.7 mm1,152 mm2Any material, including 3 mm wood and acrylic
8 × 5.5 in (203 × 140 mm)4.9 mm1,536 mm2Any material, including 3 mm wood and acrylic
12 × 8.24 in (305 × 209 mm)7.3 mm2,304 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Christmas gift bow with four loops All 15 bows Chevron bow →