Free bow SVG

Bow outline SVG

Bow outline, drawn as a line — Bow outline. The preview is the SVG file itself.

The classic bow as a line about 2 mm wide: loops, knot and curling tails, in one connected piece. For colouring pages, embroidery and foil.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.7 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	895 mm at this size
Narrowest part	1.9 mm at this size
Nodes	123 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,398 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 17 mm)	0.48 mm	227 mm	130	Too fine for most machines
2 × 1.37 in (51 × 35 mm)	0.97 mm	455 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.06 in (76 × 52 mm)	1.4 mm	682 mm	15	Vinyl, card and thin sheet
4 × 2.75 in (102 × 70 mm)	1.9 mm	909 mm	8	Vinyl, card and thin sheet
6 × 4.12 in (152 × 105 mm)	2.9 mm	1,364 mm	2	Vinyl, card and thin sheet
8 × 5.5 in (203 × 140 mm)	3.9 mm	1,819 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.24 in (305 × 209 mm)	5.8 mm	2,728 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bow SVG files

← Hair bow template in three pieces All 15 bows Thin ribbon bow →