Free blood drip SVG

Three blood drops SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Three blood drops, as a solid black shape
Three blood drops. The preview is the SVG file itself.

Three drops falling in a slanting line, large, medium and small, each with a highlight. Three separate pieces by design: scatter them under a drip border or down the side of a door.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length459 mm at this size
Narrowest part4.2 mm at this size
Nodes58 curve and line segments

Measured from the file. PNG: 1,950 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)1.1 mm117 mm100Vinyl, card and thin sheet
1.95 × 2 in (49 × 51 mm)2.1 mm233 mm25Vinyl, card and thin sheet
2.92 × 3 in (74 × 76 mm)3.2 mm350 mm9Any material, including 3 mm wood and acrylic
3.9 × 4 in (99 × 102 mm)4.3 mm466 mm4Any material, including 3 mm wood and acrylic
5.84 × 6 in (148 × 152 mm)6.4 mm700 mm2Any material, including 3 mm wood and acrylic
7.79 × 8 in (198 × 203 mm)8.5 mm933 mm1Any material, including 3 mm wood and acrylic
11.69 × 12 in (297 × 305 mm)13 mm1,399 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood drop All 16 blood drips Blood drip into a puddle →