Free blood drip SVG

Heavy blood drips border SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Heavy blood drips border, as a solid black shape
Heavy blood drips border. The preview is the SVG file itself.

A deeper band with fat, slow runs, some more than half the width of the border in length. Fewer and bolder than the plain border, so it weeds fast and shows from across the street.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length820 mm at this size
Narrowest part1.4 mm at this size
Nodes113 curve and line segments

Measured from the file. PNG: 2,000 × 1,290 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.36 mm208 mm140Too fine for most machines
2 × 1.26 in (51 × 32 mm)0.71 mm417 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.89 in (76 × 48 mm)1.1 mm625 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)1.4 mm833 mm8Vinyl, card and thin sheet
6 × 3.79 in (152 × 96 mm)2.1 mm1,250 mm3Vinyl, card and thin sheet
8 × 5.05 in (203 × 128 mm)2.8 mm1,666 mm2Vinyl, card and thin sheet
12 × 7.57 in (305 × 192 mm)4.3 mm2,499 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood drip border All 16 blood drips Blood drip corner →