Free blood drip SVG

Blood drip outline SVG

Blood drip outline, drawn as a line — Blood drip outline. The preview is the SVG file itself.

The drip border as an even line that follows every run and bead, with a straight line along the top. For colouring pages, foil and pen plotters, or to edge a filled border in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 44 mm (3.94 × 1.75 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	855 mm at this size
Narrowest part	2.2 mm at this size
Nodes	190 curve and line segments

Measured from the file. PNG: 2,000 × 931 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.44 in (25 × 11 mm)	0.56 mm	217 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.89 in (51 × 23 mm)	1.1 mm	434 mm	55	Vinyl, card and thin sheet
3 × 1.33 in (76 × 34 mm)	1.7 mm	652 mm	21	Vinyl, card and thin sheet
4 × 1.78 in (102 × 45 mm)	2.2 mm	869 mm	12	Vinyl, card and thin sheet
6 × 2.66 in (152 × 68 mm)	3.4 mm	1,303 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.55 in (203 × 90 mm)	4.5 mm	1,737 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.33 in (305 × 135 mm)	6.7 mm	2,606 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood drip corner All 16 blood drips Dripping blood sign panel →