Free blood drip SVG

Blood drop SVG

Blood drop, as a solid black shape
Blood drop. The preview is the SVG file itself.

One fat drop with its point up and a curved highlight cut near the bottom. Simple enough to cut at the size of a fingernail, and the right shape for a blood donor badge as well as for Halloween.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size57 × 100 mm (2.25 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length296 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes28 curve and line segments
Also found asBlooddrop SVG

Measured from the file. PNG: 1,177 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.57 × 1 in (15 × 25 mm)Over 1.5 mm75 mm150Vinyl, card and thin sheet
1.14 × 2 in (29 × 51 mm)Over 3 mm150 mm45Any material, including 3 mm wood and acrylic
1.72 × 3 in (44 × 76 mm)Over 4.6 mm226 mm18Any material, including 3 mm wood and acrylic
2.29 × 4 in (58 × 102 mm)Over 6.1 mm301 mm8Any material, including 3 mm wood and acrylic
3.43 × 6 in (87 × 152 mm)Over 9.1 mm451 mm3Any material, including 3 mm wood and acrylic
4.58 × 8 in (116 × 203 mm)Over 12 mm601 mm2Any material, including 3 mm wood and acrylic
6.86 × 12 in (174 × 305 mm)Over 18 mm902 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood spray of drops All 16 blood drips Three blood drops →