Free blood drip SVG

Blood spray of drops SVG

Blood spray of drops, as a solid black shape — Blood spray of drops. The preview is the SVG file itself.

A fan of twenty-three drops flying out from one corner, round and small near the start, larger and tailed as they spread, as if flicked from a brush. Loose pieces by design, for the corner of a window or a mirror.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.89 in), scales to any size
Pieces	23 separate pieces
Outlines to cut	23 outlines
Cut length	537 mm at this size
Narrowest part	4.4 mm at this size
Nodes	135 curve and line segments

Measured from the file. PNG: 2,000 × 1,975 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	1.1 mm	136 mm	100	Vinyl, card and thin sheet
2 × 1.97 in (51 × 50 mm)	2.2 mm	273 mm	25	Vinyl, card and thin sheet
3 × 2.96 in (76 × 75 mm)	3.4 mm	409 mm	9	Any material, including 3 mm wood and acrylic
4 × 3.95 in (102 × 100 mm)	4.5 mm	546 mm	4	Any material, including 3 mm wood and acrylic
6 × 5.92 in (152 × 150 mm)	6.7 mm	818 mm	1	Any material, including 3 mm wood and acrylic
8 × 7.9 in (203 × 201 mm)	8.9 mm	1,091 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.84 in (305 × 301 mm)	13 mm	1,637 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More blood drip SVG files

← Blood splat in one piece All 16 blood drips Blood drop →